FP-2000s
Slider
Model Weight Discharge
Outlets
Discharge
Time (s)
Activation Modes Dimensions Drawings Data Sheet Product Image
Net (g) Gross (g)
FP-0020S 20 310 2 3-6 Bulb Thermal Activator(BTA) 165mm x 30mm diam.
FP-0020SE 20 310 2 3-6 Electrical 165mm x 30mm diam.
FP-0040S 40 610 2 5-10 Electrical – or – Bulb Thermal Activator (BTA) 140mm x 50mm diam.
FP-0080S 80 870 2 5-10 Electrical – or – Bulb Thermal Activator (BTA) 190mm x 50mm diam.
FP-0100S 100 1,370 1 5-10 Electrical – or – Bulb Thermal Activator (BTA) 160mm x 88mm diam.
FP-0200S 200 1,840 1 5-10 Electrical – or – Bulb Thermal Activator (BTA) 190mm x 88mm diam.
FP-0500S 500 3,340 1 5-10 Electrical – or – Bulb Thermal Activator (BTA) 290mm x 88mm diam.
FP-1200 1,200 10,900 1 15-20 Electrical – or – Bulb Thermal Activator (BTA) 216mm x 300mm x 170mm
FP-2000 2,000 15,500 1 15-20 Electrical – or – Bulb Thermal Activator (BTA) 300mm x 300mm x 185mm
FP-3000 3,000 16,300 1 15-20 Electrical – or – Bulb Thermal Activator (BTA) 300mm x 300mm x 185mm
FP-5700 5,700 26,400 1 15-20 Electrical – or – Bulb Thermal Activator (BTA) 300mm x 300mm x 290mm
FP-BTA   BULB THERMAL ACTUATOR
Self-contained, automatic and temperature controlled activation system.
Thermal Actuator consists of (a)Thermo Lock with Glass Retort, (b) Spring Transmission of percussive mechanism, which initiates the capsule, (c) Safety Ring and Pin during transportation.
During operation the liquid within the bulb will expand until the required operational temperature is reached. At this point the glass bulb will ‘burst’, allowing the thermal mechanism to actuate the built-in firing pin, which in turn initiates the capsule, and causes ignition of the SBK solid compound in Generator activator.
Precise calibration of the bulbs during production enables accurate operating temperatures to be achieved.
Temp. Ratings (oC)
Temp. Tolerances
Typical Operating Time
79(Yellow), 93(Green), 182(Purple)
± 3.5 %
28 sec (UL)
HEAVY DUTY BRACKETS – 316 Stainless Steel
FP-06100 Heavy Duty Bracket
Suits : FP-1200, FP-2000, FP-3000, & FP-5700
Made from Heavy Duty 316 SSteel for Harsh Environments – Marine.

FP-06200 Heavy Duty Bracket
Suits : FP-0100, FP-0200, and FP-0500
Made from Heavy Duty 316 SSteel for Harsh Environments – Marine.

FP-06300 Heavy Duty Bracket
Suits : FP-0040 and FP-0080
Made from Heavy Duty 316 SSteel for Harsh Environments – Marine.

FirePro CONDENSED AEROSOL GENERATORS – FOR ATEX APPLICATIONS
FirePro Aerosol Generators for ATEX APPLICATIONS

FirePro ATEX Condensed Aerosol Generators are designed to operate in potentially explosive atmospheres. Local authorities have the responsibility for defining a Class, Zone, and Group classification for specific areas. The classification given to a particular zone, and its size and location, depends on the likelihood of an explosive atmosphere occurring and its persistence if it does. Areas classified into zones (0, 1, 2 for gas-vapor-mist and 20, 21, 22 for dust) must be protected from effective sources of ignition.

Model Weight Dimensions Image
Net (g) Gross (g)
FPX-0100EX 100 1,830 170mm x 84mm diam.
FPX-0200EX 200 2,315 200mm x 84mm diam.
FPX-0500EX 500 3,770 310mm x 88mm diam.
FPX-1200EX 1,200 17,050 365mm x 450mm x 310mm
FPX-2000EX 2,000 21,650 365mm x 450mm x 310mm
FPX-3000EX 3,000 22,450 365mm x 450mm x 310mm
FPX-5700EX 5,700 33,710 365mm x 450mm x 420mm